|
I have not had time to write making instructions for this project as I need some time to play with the gear I make. So I hope you can use the pictures for inspiration for this project. The vest is made
from a mixed cotton/nylon fabric, and reinforced with seatbelt type webbing. Construction advice? I found I could
not cut nice holes in seatbelts for the eyelets. The webbing was simply just too
tough. I found the best way to make the required hole for the eyelets was to
simply melted through the belt. The best method I have found for this was to use
a copper tube of the same dimension as the eyelet/s to be installed.
If you want to contact me for advice use the following address inserting @ in place of the # helmetboy#theoriginalinstitute.com
|
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|